|Dimensions||182mm x 120mm x 10mm|
|Release Date||Month year|
|Website||Device Product Page|
|SoC||A13 @ 1Ghz|
|DRAM||512MiB DDR3 @ 408MHz|
|Power||DC 5V @ ?A, 1800mAh 3.7V Li-Ion battery|
|LCD||800x480 (7" 16:9)|
|Touchscreen||5-finger capacitive (Silead GSL1680)|
|Audio||3.5mm headphone plug, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Realtek RTL8188ETC)|
|USB||1 USB2.0 OTG|
|Camera||0.3MP (640x480) front|
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
In android, under Settings->About Tablet, you will find:
- Model Number: MC7403A
- Build Number: nuclear_pub_eng 4.0.4 iMM76D 20120712 test-keys
No u-boot patch was made available, so therefor this device is not supported.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as szenio_1207c4.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
The something button triggers FEL mode.
Booting from a SD card
The original page mentioned something about disabling the NAND in the .fex file, to allow booting from SD. This seemed quite curious, and the details have therefor been removed while awaiting confirmation.
Enabling the WiFi
It might be necessary to force usbc1 on so the kernel can detect the wifi controller.
Adding a serial port (voids warranty)
See the Q8 tablet format disassembly page.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
- Bulltech Szenio 1207c4
- Time2Touch MC7403A
Add some nice to have links here. This includes related devices, and external links.