Uploads by Ssvb
Jump to navigation
Jump to search
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
21:21, 24 February 2017 | Jide Remix Mini UART wires.jpg (file) | 516 KB | 1 | ||
06:32, 23 November 2016 | SPI Flash Macronix MX25L1606E.png (file) | 24 KB | SPI NOR flash chip soldered on Xunlong Orange Pi PC 2. | 1 | |
20:11, 27 May 2016 | SPI Flash Noname 25Q128FV.jpg (file) | 22 KB | 1 | ||
19:33, 27 May 2016 | SPI Flash Winbond 25Q128FVSG.jpg (file) | 16 KB | 1 | ||
15:24, 24 May 2016 | Xunlong Orange Pi PC with improvised SPI flash shield.jpg (file) | 309 KB | The SPI0_CS,SPI0_CLK,SPI0_MOSI,SPI0_MISO,3V3,GND pins on the Xunlong Orange Pi PC expansion header are connected to the CS,CLK,DI,DO,VCC,GND pins on the [http://www.ebay.com/itm/W25Q-Windbond-Serial-Flash-Memory-Module-SPI-W25Q128B-BIOS-25Q64BVSIG-... | 1 | |
19:54, 21 May 2016 | Xunlong Orange Pi PC with W25Q SPI flash module.jpg (file) | 184 KB | 1 | ||
02:48, 6 May 2016 | Pine64 board booted over SPI.jpg (file) | 384 KB | This picture is showing the Pine64 board, which is booting over SPI (the SPI0 pins on the Pi-2 Connector) with the help of Olimex A13-OLinuXino-Micro. The A13-OLinuXino-Micro board is emulating the SPI NOR Flash behaviour and uploading the boot... | 1 | |
14:43, 17 February 2016 | Orange Pi PC measuring default VDD-CPUX.jpg (file) | 1.86 MB | 1 | ||
05:01, 31 January 2016 | Jide Remix Mini FEL button pin-hole.jpg (file) | 45 KB | 1 | ||
19:08, 30 January 2016 | Jide Remix Mini FEL button.jpg (file) | 31 KB | 1 | ||
18:56, 30 January 2016 | Jide Remix Mini UART.jpg (file) | 106 KB | 1 | ||
18:56, 30 January 2016 | Jide Remix Mini PCB bottom.jpg (file) | 580 KB | 1 | ||
18:55, 30 January 2016 | Jide Remix Mini PCB top.jpg (file) | 329 KB | 1 | ||
18:55, 30 January 2016 | Jide Remix Mini.jpg (file) | 256 KB | 1 | ||
18:48, 26 December 2015 | Lima-memtester-chart 672 672 648 672 720 672 672 744 696 696 672 672.png (file) | 10 KB | 1 | ||
09:11, 22 December 2015 | Lima-memtester-chart 672 672 648 672 720 672.png (file) | 9 KB | 1 | ||
04:24, 17 November 2015 | Xunlong Orange Pi PC LEDs.jpg (file) | 86 KB | 1 | ||
06:20, 9 October 2015 | Pcd2 uart.jpg (file) | 131 KB | Add labels for UART pins | 2 | |
10:23, 6 October 2015 | LinkSprite pcDuino2 with ITeadstudio 2.4 TFT LCD Touch shield.jpg (file) | 1.38 MB | The ITeadstudio 2.4 TFT LCD Touch shield makes use of the Arduino pins A5/A4/A3 (as RS/WR/CS pins for LCD). These pins are primarily used for analog input on Arduino, but can be also configured as general purpose digital pins too. Unfortunately pcDuino... | 1 | |
16:39, 3 October 2015 | Pcduino2-ddr3-nanya.jpg (file) | 14 KB | 1 | ||
16:39, 3 October 2015 | Pcduino2-ddr3-hynix.jpg (file) | 10 KB | 1 | ||
15:03, 13 September 2015 | Mini-USB adapter cables.jpg (file) | 1.42 MB | A collection of Mini-USB cables (left to right): 1. Mini-B plug on one end (ID pin shorted to the ground), USB Type-A receptacle on the other end. 2. Mini-A plug on one end (ID pin is shorted to the ground), USB Type-A receptacle on the other end. 3. M... | 1 | |
21:26, 17 August 2015 | FEL uboot memory map.jpg (file) | 116 KB | 1 | ||
18:34, 23 January 2015 | 20141215-sunxi-bootsetup-prototype-hdmi-menu.jpg (file) | 121 KB | 1 | ||
18:04, 23 January 2015 | 20141215-sunxi-bootsetup-prototype-uart-menu.png (file) | 7 KB | 1 | ||
18:59, 8 January 2015 | MSI Primo81 and LCD support in u-boot.jpg (file) | 1.77 MB | 1 | ||
17:30, 28 December 2014 | MSI Primo73 and MicroSD breakout.jpg (file) | 1.31 MB | Using UART serial console on MSI Primo73 with the help of MicroSD Breakout and TTL to USB serial cable. The other connected cables are Mini-HDMI and Micro-USB. | 1 | |
16:09, 28 December 2014 | MSI Primo81 and MicroSD breakout.jpg (file) | 1.22 MB | Using UART serial console on MSI Primo81 with the help of MicroSD Breakout and TTL to USB serial cable. The other connected cables are Mini-HDMI and Micro-USB. | 1 | |
19:22, 14 November 2014 | OTG Charging Hub In Action.jpg (file) | 1,016 KB | This picture is showcasing the use of USB_OTG_Charging_Hub to provide power to Olimex_A13-OLinuXino-Micro board and also connect a USB Ethernet dongle and a USB wireless keyboard/mouse receiver dongle. In this setup, X11 linux desktop system wo... | 1 | |
16:12, 14 November 2014 | 4 Port Micro Usb Power Charging Otg Hub.jpg (file) | 1.31 MB | 1 | ||
01:29, 12 October 2014 | Display quality - Primo73 (TN) vs. Primo81 (IPS) right.jpg (file) | 1.69 MB | Comparison of the colors, contrast and viewing angles between MSI Primo73 (a smaller one with 16:9 display) and MSI Primo81 (a bigger one with 4:3 display). | 1 | |
01:28, 12 October 2014 | Display quality - Primo73 (TN) vs. Primo81 (IPS) left.jpg (file) | 1.52 MB | Comparison of the colors, contrast and viewing angles between MSI Primo73 (a smaller one with 16:9 display) and MSI Primo81 (a bigger one with 4:3 display). | 1 | |
01:27, 12 October 2014 | Display quality - Primo73 (TN) vs. Primo81 (IPS) frontal.jpg (file) | 1.3 MB | Comparison of the colors, contrast and viewing angles between MSI Primo73 (a smaller one with 16:9 display) and MSI Primo81 (a bigger one with 4:3 display). | 1 | |
09:20, 6 October 2014 | MSI Primo73 back.jpg (file) | 1.39 MB | 2 | ||
08:35, 6 October 2014 | MSI Primo73 buttons.jpg (file) | 1.33 MB | 1 | ||
08:34, 6 October 2014 | MSI Primo73 connectors.jpg (file) | 1.24 MB | 1 | ||
08:33, 6 October 2014 | MSI Primo73 front.jpg (file) | 720 KB | 1 | ||
08:00, 6 October 2014 | MSI Primo81 buttons.jpg (file) | 1.37 MB | 1 | ||
07:46, 6 October 2014 | MSI Primo81 connectors.jpg (file) | 1.34 MB | 1 | ||
07:45, 6 October 2014 | MSI Primo81 back.jpg (file) | 1.29 MB | 1 | ||
11:03, 1 October 2014 | MSI Primo81 front.jpg (file) | 612 KB | 1 | ||
09:55, 13 September 2014 | A13-OLinuXino-Micro-backside.jpg (file) | 941 KB | 1 | ||
21:21, 12 September 2014 | A13-OLinuXino-Micro-frontside.jpg (file) | 1.05 MB | 1 |