Nextbook Ares 10a

Jump to navigation Jump to search
Nextbook Ares 10a
Manufacturer [Nextbook]
Release Date 2017
Website [Nextbook Website seemingly Dead]
SoC A64 @ 1.3Ghz
DRAM 1GiB DDR3(L) @ ??MHz
NAND 32GB (28.906 Gb actual)
Power DC 5V @ 2A, 4000mAh 3.8V Li-Ion battery
LCD 1280 x 800; DPI: 160
Touchscreen 5-finger capacitive
Video Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
Audio 3.5mm headphone plug, internal stereo speakers
Network WiFi RTL8723CS, Ethernet Realtek 8150 based adapters
Storage 32Gb Flash, 128Gb SD Slot
USB 1 USB2.0 Host/OTG
Camera 1.9MP (1600x1200) front, 1.9MP (1600x1200) rear
Other Bosch 3-axis Accelerometer, GPS, Bluetooth
Headers UART(?), LCD

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

So Far

I've struggled to get this tablet going with lacking information around the innernet, however while writing this page, I'm finding more and more that this device is very close to the Pine64. Still searching! Specs found here:


At the bottom of the board is printed AW02_V1.2 2017/08/16

Model Number: NX16A10132SPS Build Number: tulip_p3-user 7.1.1 N9F27C 20171123 test-keys

Sunxi support

Responds well to all Suxni-tool as far as I can tell.

FEL Mode

1.) Hold VolUp+PWR - few sec. 2.) Release PWR - couple sec. 3.) Press PWR - Repeatedly - couple sec. 4.) Hold PWR - few sec. 5.) Release PWR. 6.) Release VolUp. (Note - VolUp is held until last step but the rest does not have to be exact.)