Micromax P300
| Micromax P300 | |
|---|---|
 | |
| Manufacturer | Micromax |
| Dimensions | 192mm x 122mm x 10.50mm |
| Release Date | April 2012 |
| Website | Micromax P300(funbook) |
| Specifications | |
| SoC | A10 @ 1Ghz |
| DRAM | 512MiB DDR3 @ xxxMHz |
| NAND | 4GB |
| Power | DC 5V @ ?A, 2800mAh 4.2V Li-Ion battery |
| Features | |
| LCD | 800x480 (7" 16:9) |
| Touchscreen | X-finger capacitive (TODO: Manufacturer device) |
| Video | HDMI (Type C - mini) |
| Audio | 3.5mm headphone plug, HDMI, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Manufacturer device) |
| Storage | µSD |
| USB | 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front |
| Other | Accelerometer (manufacturer device FIXME) |
| Headers | UART, JTAG |
Identification
In android, under Settings->About Tablet, you will find:
- Model Number: P300(Funbook)
- Build Number: 97F1-D1-H2-H01-MMX.20120914
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code.
HW-Pack
Add MANUFACTURER DEVICE HW-pack specifics here.
BSP
Add MANUFACTURER DEVICE BSP specifics here.
Manual build
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The something button triggers FEL mode.
Device specific topic
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here.
Also known as
List rebadged devices here.
See also
Add some nice to have links here. This includes related devices, and external links.