Finepower N1

From linux-sunxi.org
Jump to: navigation, search
Finepower N1
FinePower N1-1.jpg
Manufacturer Finepower
Dimensions 193mm x 115mm x 10.4mm
Release Date 2017
Website Device Product Page
Specifications
SoC A33 @ 1.2Ghz
DRAM 512MiB DDR3 @ xxxMHz
NAND 4GB
Power DC 5V @ 2A, 2200mAh 3.7V Li-Ion battery
Features
LCD 7" 1024x600
Touchscreen X-finger capacitive/resistive (Hynitron CST2XX)
Video LCD
Audio 3.5mm headphone plug, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (RTL8703BS)
Storage µSD
USB 1 USB2.0 OTG
Camera 0.3MP (640x480) front

Identification

On the back of the device, the following is printed:

FinePower
Model: N1
Rev.2

The PCB has the following silkscreened on it:

TZX-723VC4

In android, under Settings->About Tablet, you will find:

  • Model Number: N1
  • Build Number: N1_R01_13.04.2018_V1.2

Sunxi support

Current status

Supported under mainline u-boot and mainline kernel.

Android modules
cst2xx 18173 0 - Live 0xbf331000
sc7660 13524 0 - Live 0xbf329000
cdc_ether 5099 0 - Live 0xbf323000
rtl8150 9023 0 - Live 0xbf31c000
mcs7830 6292 0 - Live 0xbf316000
qf9700 7805 0 - Live 0xbf310000
asix 17150 0 - Live 0xbf307000
usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0xbf2fc000
sunxi_keyboard 3021 0 - Live 0xbf2f8000
sw_device 14991 0 - Live 0xbf2f0000
vfe_v4l2 448072 0 - Live 0xbf268000
s5k6aafx 21182 0 - Live 0xbf25e000
bf3603 9619 0 - Live 0xbf257000
sp2519 10857 0 - Live 0xbf250000
sp0a19 11296 0 - Live 0xbf249000
sp0838 10574 0 - Live 0xbf242000
bf3920 9807 0 - Live 0xbf23b000
bf3703 9570 0 - Live 0xbf234000
siv121du 10782 0 - Live 0xbf22d000
gc2155 12592 0 - Live 0xbf225000
gc2145 12536 0 - Live 0xbf21d000
gc2035 12824 0 - Live 0xbf215000
gc0309 10622 0 - Live 0xbf20e000
gc0329 10478 0 - Live 0xbf207000
gc0312 10535 0 - Live 0xbf200000
gc0308 10822 0 - Live 0xbf1f9000
gc0328 10687 0 - Live 0xbf1f2000
vfe_subdev 4771 17 vfe_v4l2,s5k6aafx,bf3603,sp2519,sp0a19,sp0838,bf3920,bf3703,siv121du,gc2155,gc2145,gc2035,gc0309,gc0329,gc0312,gc0308,gc0328, Live 0xbf1ed000
vfe_os 3951 2 vfe_v4l2,vfe_subdev, Live 0xbf1e8000
cci 21602 16 s5k6aafx,bf3603,sp2519,sp0a19,sp0838,bf3920,bf3703,siv121du,gc2155,gc2145,gc2035,gc0309,gc0329,gc0312,gc0308,gc0328, Live 0xbf1dc000
videobuf_dma_contig 5567 1 vfe_v4l2, Live 0xbf1d7000
videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0xbf1cd000
leds_sunxi 1359 0 - Live 0xbf1c9000
mali 212058 20 - Live 0xbf181000 (O)
lcd 116877 0 - Live 0xbf15f000
disp 992768 8 mali,lcd, Live 0xbf058000
nand 294363 8 - Live 0xbf000000 (O)

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Mainline U-Boot

Use the "q8_a33_tablet_1024x600_defconfig" build target.

Linux Kernel

Mainline kernel

Use the "sun8i-a33-q8-tablet.dtb" device-tree binary.
Wi-Fi kernel module: https://gitlab.com/astroncia/rtl8723cs

FEL mode

The something button triggers FEL mode.

Adding a serial port (voids warranty)

DEVICE UART pads

This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.

Device disassembly

See the Q8 tablet format disassembly page.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

See also

Other Q8 format A33 based tablets.