Eearl H1026A

From linux-sunxi.org
Jump to: navigation, search
Eearl H1026A
Device front.jpg
Manufacturer Eearl Group LTD
Dimensions 278mm x 188mm x 25mm
Release Date August 2012
Website Product Page
Specifications
SoC A10, @ 1Ghz
DRAM 512MiB/1GiB DDR3
NAND 4/8GB
Power DC 5V @ ?A, ??mAh 3.7V Li-Ion battery
Features
LCD 1024x600 (10" ~16:9)
Audio 3.5mm headphone plug
Network WiFi 802.11 b/g (Realtek RTL8192CU), 10/100Mbps Ethernet (Manufacturer device)
Storage SD
USB 3 USB2.0 Host, X USB2.0 OTG
Camera 0.3MP (640x480) front-facing

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurp.

Contents

Identification

In android, under Settings->About Tablet, you will find:

  • Model Number: DEVICE
  • Build Number: SOC_BOARD_DEVICE_*.*

Sunxi support

Current status

Everything works. Camera is UVC and requires a modified driver.

Images

Debian (Squeeze) SD card image: a10_netbook_4gb.tar.xz

HW-Pack

BSP

Manual build

  • For building u-boot, use the "H6" target.
  • The .fex file can be found in sunxi-boards as h6.fex

Everything else is the same as the manual build howto.

Tips, Tricks, Caveats

FEL mode

There is a button marked uboot between the ram chips and the usb ports, which triggers FEL mode.

Adding a serial port (voids warranty)

DEVICE UART pads

Device disassembly

Provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Also known as

The same motherboard could have been resold inside the 7" A10 Netbook.

See also

Personal tools
Namespaces

Variants
Actions
Navigation
Tools