Digix TAB-730
| Digix TAB-730 | |
|---|---|
 | |
| Manufacturer | Digix (defunct) |
| Dimensions | 125.9mm x 198.8mm x 10.9mm |
| Release Date | November 2011 |
| Website | (defunct) |
| Specifications | |
| SoC | A10 @ 1.2Ghz |
| DRAM | 512MiB DDR3 @ xxxMHz |
| NAND | 4GB |
| Power | DC 5V @ 2A, 3000mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 800x480 (7" 5:3) |
| Touchscreen | 5-finger capacitive (Focaltech ft5x) |
| Video | HDMI (Type C - mini) |
| Audio | 3.5mm headphone plug, HDMI, internal stereo speakers, internal microphone |
| Network | WiFi 802.11 b/g/n (Realtek RTL8192cu), 10/100/1000Mbps Ethernet (Manufacturer device) |
| Storage | µSD |
| USB | 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front |
| Other | Accelerometer (MMA7660) |
| Headers | UART, JTAG, LCD, VGA, ... |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
Identification
On the back of the device, the following is printed:
DIGIX Model: TAB-730 FCC ID: YAPTAB730
The PCB has the following silkscreened on it:
ST-02 94V-0 E310229
TAB730MA1X30 20120814 Contel
In android, under Settings->About Tablet, you will find:
- Model Number: TAB-730
There is no build number.
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
HW-Pack
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
BSP
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Only useful for A10/A10s/A13 and A20 based devices. Remove this section otherwise.
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Only useful for A10/A10s/A13 and A20 based devices. Remove this section otherwise.
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
To trigger FEL mode unplug USB, turn it off, hold down the Volume Down button, plug in USB, quickly press the Power button ten times, and release the Power and Volume Down buttons.
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
Remove the screw next to the USB port and slide the back cover away. Make sure to not break the thin speaker wires.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Schematic
List schematics, board layout, cad files, etc here.
Also known as
Sophix TAB-730g
See also
Manufacturer images
Optional. Add non-sunxi images in this section.