Coby MID7042

From linux-sunxi.org
Jump to: navigation, search
Coby MID7042
Device front.jpg
Manufacturer Coby Electronics (defunct)
Dimensions 195.6mm x 114.3mm x 10.2mm
Release Date April 2012
Website Device Product Page
Specifications
SoC A10 @ 1Ghz
DRAM 1GiB DDR3
NAND 4/8GB
Power DC 5V @ 2A, 3500mAh 3.7V Li-Ion battery
Features
LCD 800x480 (7" 16:9)
Touchscreen X-finger capacitive (Manufacturer device FIXME)
Video HDMI (Type C - mini)
Audio 3.5mm headphone plug, HDMI, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (Manufacturer device)
Storage µSD
USB 1 USB2.0 OTG
Camera 0.3MP (640x480) front

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

Contents

Identification

In android, under Settings->About Tablet, you will find:

  • Model Number: MID7042
  • Build Number: 20120409.181217

Sunxi support

Current status

Everything except for the touchscreen seems to work.

Images

HW-Pack

BSP

Manual build

  • For building u-boot, use the "Coby_MID7042" target.
  • The .fex file can be found in sunxi-boards as coby_mid7042.fex

Everything else is the same as the manual build howto.

Tips, Tricks, Caveats

FEL mode

The something button triggers FEL mode.

Adding a serial port (voids warranty)

UART and JTAG pads

Device disassembly

Provide a short description of how to open the device. Explain how the pins can be most easily popped.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Take some pictures of your device, upload them, and add them here.

Also known as

Pendopad 4.0 7" PP4MT-7

See also

Personal tools
Namespaces

Variants
Actions
Navigation
Tools