CUBE U11GT
| CUBE U11GT | |
|---|---|
 | |
| Manufacturer | CUBE |
| Dimensions | 194mm x 119mm x 11mm |
| Release Date | December 2011 |
| Specifications | |
| SoC | A10 @ 1Ghz |
| DRAM | 512MiB DDR3 @ 360MHz |
| NAND | 8GB |
| Power | DC 5V @ 2A, 3000mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 800x480 (7" 15:9) |
| Touchscreen | 5-finger capacitive (Goodix GT801) |
| Video | HDMI (Type C - mini) |
| Audio | 3.5mm headphone plug, HDMI, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Realtek RTL8188CUS) |
| Storage | µSD |
| USB | 0 USB2.0 Host, 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front |
| Other | Accelerometer (Freescale MMA7660) |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
It has a Home Button on its front side.
Identification
On the back of the device, the following is printed:
酷比魔方 CUBE U11GT Made in China
The PCB has the following silkscreened on it:
U11GT V0.3 2011-11-04
In android, under Settings->About Tablet, you will find:
- Model Number: U11GT
Sunxi support
Current status
Not supported.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The ESC button triggers FEL mode.
Adding USB Host port
This device has an empty USB Host pad. A guy tried soldering it. Link (in Chinese): [1]
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
This tablet only uses clips to hold its back, so be cautious and follow Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Also known as
List rebadged devices here.
See also
Add some nice to have links here. This includes related devices, and external links.