Xunlong Orange Pi Lite 2

From linux-sunxi.org
Jump to: navigation, search
Xunlong Orange Pi Lite 2
Manufacturer OrangePi
Website Device Product Page
Specifications
SoC H6 @ 1,8 Ghz
DRAM 1GiB LPDDR3 @ xxxMHz
Power DC 5V @ 3A
Features
Video HDMI (Type 2.0A - full)
Audio HDMI, on-board microphone
Network WiFi
Storage µSD
USB 1 USB3.0 Host 1 USB2.0 Host, 1 USB2.0 OTG

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

The Orange Pi Lite 2 is a 64-bit H6 based single board computer produced by Xunlong.

The Orange Pi Lite 2 is the older brother of Orange Pi Lite. It sports the powerful Allwinner H6 SoC. In comparison to Orange Pi Lite based on H3, this board has a Quad Core Arm Cortex-A53 cpu. The SoC is capable of 4k at 60fps with it's ARM Mali-T720 MP2 Graphics Processor.

Unlike other boards, it uses a gigabyte LPDDR3 instead of power-eater DDR3. It also comes with USB 3.0 Host, unlike it's cousin, Orange Pi One Plus. It misses the Ethernet but it's got WiFi on board which is more handy if you are using it wirelessly. It comes also with low-level interfaces such as UART, SPI ,I²C and etc.

Contents

Identification

Template:Remove if done

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Give Link to kernel repo

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

Booting without an SD card automagically enters FEL mode.

./sunxi-fel version
AWUSBFEX soc=00001728(unknown) 00000001 ver=0001 44 08 scratchpad=00027e00 00000000 00000000

The U BOOT pin on the H6 SoC is routed to test-point TP28 on it's PCB.

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Pictures

Take some pictures of YOUR LITE2, upload them, and add them here. PUT ONLY YOURS, PLEASE NO PHOTOS WHICH YOU GOT FROM SOMEWHERE.


Also known as

There are currently no known rebadged devices. Update this section if you know otherwise.

See also

Manufacturer images

Optional. Add non-sunxi images in this section.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools