ViPER MovieMate

From linux-sunxi.org
Jump to: navigation, search
ViPER MovieMate
ViPER MovieMate 20160129 120714.jpg
Manufacturer audlabs.com
Dimensions 41mm x 68mm x 2mm
Release Date May 2015
Website Product Page
Specifications
SoC A10s @ 1Ghz
DRAM 128MiB DDR3 @ ?MHz (H5TQ1G63EFR-H9C)
Power DC 5V @ 1A
Features
Audio 3.5mm headphone plug
Storage 16MiB of SPI flash (MX25L12835F)
USB USB2.0 OTG

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

This device can boot from SPI flash.

Identification

This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.

On the back of the device, the following is printed:

Manufacturer Marketing Name
ModelNumber

The PCB has the following silkscreened on it:

LIA-BB-V6.66
1970-01-01

In android, under Settings->About Tablet, you will find:

  • Model Number: DEVICE
  • Build Number: SOC_BOARD_DEVICE_*.*

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Use the MANUFACTURER_DEVICE.fex file.

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The something button triggers FEL mode.

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Adding a serial port (voids warranty)

DEVICE UART pads

This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.

Device disassembly

If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Also known as

List rebadged devices here.

See also

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Optional. Add non-sunxi images in this section.