Teclast M8
| Teclast M8 | |
|---|---|
 | |
| Manufacturer | TeclastM8 |
| Dimensions | widthmm x breadthmm x heightmm |
| Release Date | Month year |
| Website | Device Product Page |
| Specifications | |
| SoC | A63 @ 1.8Ghz |
| DRAM | 3GiB DDR3 @ 533MHz |
| NAND | 32GB |
| Power | DC 5V @ 2A, 5000mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 2560x1600 (8.4" 2560*1600) |
| Touchscreen | X-finger capacitive/resistive (Manufacturer device) |
| Video | na |
| Audio | 3.5mm headphone plug, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n/ac (Manufacturer device), |
| Storage | µSD |
| USB | 1 X USB2.0 OTG |
| Camera | 200MP (????x????) front, 500MP (????x????) rear |
| Other | Accelerometer (Manufacturer device), GPS |
Identification
On the back of the device, the following is printed:
Teclast M8
The PCB has the following silkscreened on it:
LIA-BB-V6.66 1970-01-01
In android, under Settings->About Tablet, you will find:
- Model Number: Teclast M8
- Build Number: SOC_BOARD_DEVICE_*.*
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
TBD
HW-Pack
TBD
BSP
TBD
Manual build
You can build things for yourself by following our Manual build howto .
reference note in A63 chip.
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
Schematic
none
See also
Manufacturer images
[firmware]