|Dimensions||99mm x 82mm|
|Release Date||November 2014|
|Website||Device Product Page|
|SoC||A33 @ 1008Mhz|
|DRAM||1GiB DDR3 (Samsung K4B4G1646Q-HYKO * 2)@ 552MHz|
|NAND||4GB eMMC (Toshiba THGBM5G5A1JBAIR)|
|Power||DC 5V @ 2A, Battery connector|
|Audio||3.5mm headphone plug, 3.5mm microphone plug|
|USB||1 USB2.0 Host, 1 USB2.0 OTG|
The Sinlinx SinA33 is an A33 based development board by Sinlinx.
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
On the back of the device, the following is printed:
Manufacturer Marketing Name ModelNumber
The PCB has the following silkscreened on it:
SINA33 芯灵思 | SINLINX
There is no support for A33 in legacy sunxi, but the board is supported by mainline U-Boot & kernels.
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
Use the Sinlinx_SinA33_defconfig build target.
Use the sun8i-a33-sina33.dtb device-tree tree binary.
Tips, Tricks, Caveats
The something button triggers FEL mode.
Optional LCD or VGA output
Sinlinx provides a separate 7" LCD module or an LCD to VGA converter module, which can be connected to the board with a ribbon cable.
Adding a serial port
Locating the UART
UART0 and UART1 are available on the USER IO header. UART0 and UART2 share the same RX/TX pins with different mux values.
Sinlinx provides Android and Linux images to buyers, hosted on BaiduPan (Baidu's cloud storage).