Prestigio PER3464B
| Prestigio PER3464B | |
|---|---|
 | |
| Manufacturer | Manufacturer |
| Dimensions | widthmm x breadthmm x heightmm |
| Release Date | Month year |
| Website | Device Product Page |
| Specifications | |
| SoC | AXX @ XGhz |
| DRAM | 512MiB/1GiB/2GiB DDR3 @ xxxMHz |
| NAND | 2/4/8/16GB |
| Power | DC 5V @ 3A, 3700mAh 3.7V Li-Ion battery |
| Features | |
| LCD | WidthxHeight (X" X:Y) |
| Touchscreen | X-finger capacitive/resistive (Manufacturer device) |
| Video | HDMI (Type A/B/C - full/mini/micro), VGA |
| Audio | 3.5mm headphone plug, 3.5mm microphone plug, HDMI, SPDIF, internal stereo speakers, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Manufacturer device), 10/100/1000Mbps Ethernet (Manufacturer device) |
| Storage | µSD, SATA |
| USB | X USB2.0 Host, X USB2.0 OTG |
| Camera | ??.?MP (????x????) front, ??.?MP (????x????) rear |
| Other | Accelerometer (Manufacturer device), GPS, IRDA |
| Headers | UART, JTAG, LCD, VGA, ... |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
Identification
This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.
On the back of the device, the following is printed:
Manufacturer Marketing Name ModelNumber
The PCB has the following silkscreened on it:
LIA-BB-V6.66 1970-01-01
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
HW-Pack
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
BSP
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
Paste from original device page
based on E200 SoC + AXP199
e-ink display
USB charging/mass storage gadget
uSD card
2.5mm headphone jack, stereo mini-speakers
Unknown system which includes ebook/html/pdf/.. reader and mp3/flac/ogg/.. player.
FEL mode
The something button triggers FEL mode.
Device specific topic
If there are no further device specific topics to add, remove these sections.
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
Also known as
List rebadged devices here.
See also
Add some nice to have links here. This includes related devices, and external links.
Manufacturer images
Optional. Add non-sunxi images in this section.