|Dimensions||widthmm x breadthmm x heightmm|
|Release Date||August 2021|
|Website||Product Support Page|
|SoC||F1C200s @ 420Mhz|
|DRAM||64MiB DDR @ 420MHz (SIP)|
|USB||1 USB2.0 OTG|
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
- 1 Identification
- 2 Sunxi support
- 3 Tips, Tricks, Caveats
- 4 Pictures
- 5 Schematic
- 6 Also known as
- 7 See also
The PCB has the following silkscreened on it:
MangoPi-R3 Ver:C MANGOPI 20211031
No sunxi support now
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
Use the MANUFACTURER_DEVICE build target.
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
The boot button and rst button triggers FEL mode.
If there are no further device specific topics to add, remove these sections.
Locating the UART
Serial console is available via the USB Female Micro-B marked TTL. See the UART howto for more details.
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
List schematics, board layout, cad files, etc here.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.