CherryPi PC V3S
| CherryPi PC V3S | |
|---|---|
 | |
| Manufacturer | Shenzhen LC Technology |
| Dimensions | 85mm x 56mm |
| Release Date | January 2021 |
| Website | LcTech Pi V3s Product Page |
| Specifications | |
| SoC | V3s @ 1.2Ghz |
| DRAM | 64MiB DDR2 Integrated @ 360MHz |
| NAND | 128MB |
| Power | via 5V Type-C USB or via 5V microB OTG |
| Features | |
| LCD | optional |
| Audio | 3.5mm headphone plug, on-board microphone |
| Network | WiFi 802.11 b/g/n (Espressif ESP8089), 10/100 Ethernet |
| Storage | µSD |
| USB | 1x USB2.0 OTG |
| Camera | MIPI CSI |
| Headers | 16-pin GPIO |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
Identification
CherryPi PC V3s is a development board by Shenzhen LC Technology Co., Ltd. based on Allwinner V3s with a standard Raspberry Pi 3/4 board size. At some point name was changed to Lctech Pi V3s
The PCB has the following silkscreened on the bottom:
CherryPi-PC_V3S_V1.2 www.lctech-inc.com
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
HW-Pack
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
BSP
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Only useful for A10/A10s/A13 and A20 based devices. Remove this section otherwise.
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Only useful for A10/A10s/A13 and A20 based devices. Remove this section otherwise.
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The something button triggers FEL mode.
Device specific topic
If there are no further device specific topics to add, remove these sections.
...
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Schematic
List schematics, board layout, cad files, etc here.
Also known as
Lctech Pi H3 V7
See also
Add some nice to have links here. This includes related devices, and external links.
Manufacturer images
Optional. Add non-sunxi images in this section.