8BCraft Retrostone
Work in Progress. Please contribute and join discord to discuss https://discord.gg/G5yxVPp
| 8BCraft Retrostone | |
|---|---|
 | |
| Manufacturer | 8BCraft |
| Dimensions | 90mm x 25mm x 130mm |
| Release Date | 07/2018 |
| Website | 8BCraft Retrostone |
| Specifications | |
| SoC | H3 @ 1.2Ghz |
| DRAM | 1GiB DDR3 @ xxxMHz |
| Power | DC 5V @ 3A, 3000mAh 3.7V Li-Ion battery, energysquare |
| Features | |
| LCD | WidthxHeight (3.5" X:Y) |
| Video | HDMI (Type A/B/C - full/mini/micro), VGA |
| Audio | 3.5mm headphone plug, HDMI, SPDIF, internal stereo speakers, internal speaker |
| Network | 100Mbps Ethernet (Manufacturer device) |
| Storage | µSD |
| USB | 4x USB2.0 Host |
| Other | Built-in game controller, D-Pad and buttons |
| Headers | UART, JTAG, LCD, VGA |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
Identification
This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.
On the back of the device, the following is printed:
RSN-001
The PCB has the following silkscreened on it:
RetroStone Pi v.13
Sunxi support
Current status
Retrostone currently uses stock H3 u-boot and FEX
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The something button triggers FEL mode.
Device specific topic
If there are no further device specific topics to add, remove these sections.
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
Also known as
List rebadged devices here.
See also
Add some nice to have links here. This includes related devices, and external links.
Manufacturer images
Optional. Add non-sunxi images in this section.