User:Putti/Unknown Device
| Putti/Unknown Device | |
|---|---|
 | |
| Manufacturer | Manufacturer |
| Dimensions | widthmm x breadthmm x heightmm |
| Release Date | Month year |
| Website | Device Product Page |
| Specifications | |
| SoC | A33 @ 1.344Ghz |
| DRAM | 512MiB DDR3 @ xxxMHz |
| NAND | 4GB |
| Power | DC 5V @ xA, 3000mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 800x480 (7" 16:9)
(LJD700B001A) |
| Touchscreen | X-finger capacitive (Manufacturer device) |
| Audio | 3.5mm headphone plug, 3.5mm microphone plug, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Manufacturer device) |
| Storage | µSD |
| USB | X USB2.0 Host, X USB2.0 OTG |
| Camera | 0.3MP (640x480) front, 0.3MP (640x480) rear |
| Other | Accelerometer (Manufacturer device) |
| Headers | UART, JTAG, LCD |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
Identification
The PCB has the following silkscreened on it:
ET_Q8_V2.0 160329
In android, under Settings->About Tablet, you will find:
- Model Number: astar
- Build Number: astar_rtl8703-eng 4.4.2 KVT49L 20160422 test-keys
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
HW-Pack
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
BSP
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The something button triggers FEL mode.
Device specific topic
If there are no further device specific topics to add, remove these sections.
...
Adding a serial port (voids warranty)
This device doesn't have dedicated UART pads, and instead UART can be used via the ̣µ SD card slot. See MicroSD Breakout page for more information on how to make use of it.
Device disassembly
See the Q8 tablet format disassembly page.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Also known as
List rebadged devices here.