User:Putti/Unknown Device

From linux-sunxi.org
Jump to: navigation, search
Putti/Unknown Device
ET Q8 V2.0 Front.jpg
Manufacturer Manufacturer
Dimensions widthmm x breadthmm x heightmm
Release Date Month year
Website Device Product Page
Specifications
SoC A33 @ 1.344Ghz
DRAM 512MiB DDR3 @ xxxMHz
NAND 4GB
Power DC 5V @ xA, 3000mAh 3.7V Li-Ion battery
Features
LCD

800x480 (7" 16:9)

(LJD700B001A)
Touchscreen X-finger capacitive (Manufacturer device)
Audio 3.5mm headphone plug, 3.5mm microphone plug, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (Manufacturer device)
Storage µSD
USB X USB2.0 Host, X USB2.0 OTG
Camera 0.3MP (640x480) front, 0.3MP (640x480) rear
Other Accelerometer (Manufacturer device)

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.

Contents

Identification

The PCB has the following silkscreened on it:

ET_Q8_V2.0
160329

In android, under Settings->About Tablet, you will find:

  • Model Number: astar
  • Build Number: astar_rtl8703-eng 4.4.2 KVT49L 20160422 test-keys

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Use the MANUFACTURER_DEVICE.fex file.

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The something button triggers FEL mode.

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Adding a serial port (voids warranty)

This device doesn't have dedicated UART pads, and instead UART can be used via the ̣µ SD card slot. See MicroSD Breakout page for more information on how to make use of it.

Device disassembly

See the Q8 tablet format disassembly page.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Also known as

List rebadged devices here.

See also

Personal tools
Namespaces

Variants
Actions
Navigation
Tools