Sharevdi x1

From linux-sunxi.org
Jump to: navigation, search
Sharevdi x1
X1.jpg
Manufacturer Sharevdi
Dimensions 155mm x 105mm x 15mm
Release Date N/A
Website X1
Specifications
SoC A20 @ 1.2Ghz
DRAM 512MiB DDR3
NAND 4GB
Power DC 5V
Features
LCD none
Touchscreen none
Video HDMI, VGA
Audio 3.5mm headphone plug, 3.5mm microphone plug
Network WiFi 802.11 b/g/n (RTL8188EUS), 10/100Mbps Ethernet (RTL8201CP)
Storage none
USB 2 X USB2.0 (GL850G)
Camera none
Other none

Contents

Identification

On the front of the device, the following is printed:

Sharevdi

Sunxi support

Current status

Not supported

Locating the UART

UART1 - [1]-GND, [2]-Tx, [3]Rx, [4]-VCC

U-Boot

U-Boot 2011.09-rc1 (Jun 03 2015 - 14:33:37) Allwinner Technology
arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 4.7.3 20130328 (prerelease)
GNU ld (GNU Binutils for Ubuntu) 2.22

Boot log

HELLO! BOOT0 is starting!
boot0 version : 2.0.0
read dram para.
dram driver version: 1.15
dram size =512MB
0xffffffff
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.161] boot1 version : 2.0.0
[       0.161] pmu type = 3
[       0.263] bat vol = 0 mv
[       0.276] axi:ahb:apb=4:2:2
[       0.276] set dcdc2=1400mv, clock=912M successed
[       0.278] key
[       2.491] LRADC key timeout without power key
[       2.491] flash init start
[       2.492] NB1 : enter NFB_Init
[       2.496] NB1 : enter phy init
[       2.499] [NAND] nand driver(A20) version: 0x0x00000002, 0x0x00000012, data: 0x426fff5c 1111692653
[       2.508] get the good blk ratio from hwscan : 870 
[       2.513] NB1 : nand phy init ok
[       3.094] _RepairLogBlkTbl start
[       3.095] Log Block Index 0x00000000, LogicBlockNum: 0x0000002a, LogBlockType: 0x00000000
[       3.100] log0: 0x00000377, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.107] datablock: 0x00000378, lastusedpage: 0x00000074
[       3.114] Log Block Index 0x00000001, LogicBlockNum: 0x0000007a, LogBlockType: 0x00000000
[       3.121] log0: 0x00000380, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.128] datablock: 0x000003a0, lastusedpage: 0x0000002f
[       3.134] Log Block Index 0x00000002, LogicBlockNum: 0x00000079, LogBlockType: 0x00000000
[       3.142] log0: 0x0000038c, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.148] datablock: 0x000003a1, lastusedpage: 0x00000061
[       3.155] Log Block Index 0x00000003, LogicBlockNum: 0x00000078, LogBlockType: 0x00000000
[       3.162] log0: 0x0000038d, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.169] datablock: 0x000003a2, lastusedpage: 0x00000064
[       3.176] Log Block Index 0x00000004, LogicBlockNum: 0x00000072, LogBlockType: 0x00000000
[       3.183] log0: 0x00000389, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.190] datablock: 0x000003a8, lastusedpage: 0x00000002
[       3.196] Log Block Index 0x00000005, LogicBlockNum: 0x00000068, LogBlockType: 0x00000000
[       3.204] log0: 0x00000381, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.210] datablock: 0x000003b2, lastusedpage: 0x000000f9
[       3.217] Log Block Index 0x00000006, LogicBlockNum: 0x00000067, LogBlockType: 0x00000000
[       3.224] log0: 0x0000038b, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.231] datablock: 0x000003b3, lastusedpage: 0x0000006e
[       3.238] Log Block Index 0x00000007, LogicBlockNum: 0x00000053, LogBlockType: 0x00000000
[       3.245] log0: 0x00000382, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.251] datablock: 0x000003c7, lastusedpage: 0x00000002
[       3.258] Log Block Index 0x00000008, LogicBlockNum: 0x00000052, LogBlockType: 0x00000000
[       3.265] log0: 0x00000387, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.272] datablock: 0x000003c8, lastusedpage: 0x00000033
[       3.279] Log Block Index 0x00000009, LogicBlockNum: 0x0000004d, LogBlockType: 0x00000000
[       3.286] log0: 0x00000383, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.293] datablock: 0x000003cd, lastusedpage: 0x00000002
[       3.299] Log Block Index 0x0000000a, LogicBlockNum: 0x00000038, LogBlockType: 0x00000000
[       3.307] log0: 0x00000384, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.313] datablock: 0x000003e2, lastusedpage: 0x00000002
[       3.320] Log Block Index 0x0000000b, LogicBlockNum: 0x00000031, LogBlockType: 0x00000000
[       3.327] log0: 0x00000388, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.334] datablock: 0x000003e9, lastusedpage: 0x00000063
[       3.341] Log Block Index 0x0000000c, LogicBlockNum: 0x00000030, LogBlockType: 0x00000000
[       3.348] log0: 0x0000037e, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.355] datablock: 0x000003ea, lastusedpage: 0x00000002
[       3.361] Log Block Index 0x0000000d, LogicBlockNum: 0x00000029, LogBlockType: 0x00000000
[       3.369] log0: 0x0000038a, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.375] datablock: 0x000003f0, lastusedpage: 0x000000af
[       3.382] Log Block Index 0x0000000e, LogicBlockNum: 0x00000041, LogBlockType: 0x00000000
[       3.389] log0: 0x000003f1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.396] datablock: 0x000003d9, lastusedpage: 0x00000056
[       3.402] Log Block Index 0x0000000f, LogicBlockNum: 0x00000028, LogBlockType: 0x00000000
[       3.410] log0: 0x00000392, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.416] datablock: 0x000003f2, lastusedpage: 0x00000062
[       3.423] Log Block Index 0x00000010, LogicBlockNum: 0x0000007c, LogBlockType: 0x00000000
[       3.430] log0: 0x000003f3, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.437] datablock: 0x0000039e, lastusedpage: 0x00000007
[       3.444] Log Block Index 0x00000011, LogicBlockNum: 0x0000007b, LogBlockType: 0x00000000
[       3.451] log0: 0x000003fa, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.458] datablock: 0x0000039f, lastusedpage: 0x00000016
[       3.464] Log Block Index 0x00000012, LogicBlockNum: 0x00000074, LogBlockType: 0x00000000
[       3.472] log0: 0x000003fb, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       3.478] datablock: 0x000003a6, lastusedpage: 0x00000035
[       3.484] _RepairLogBlkTbl end
[       3.494] NB1 : init ok
[       3.494] flash init finish
[       3.496] fs init ok
[       3.497] fattype FAT16
[       3.499] fs mount ok
[       3.506] script finish
[       3.507] nand good_block_ratio=870
[       3.508] storage_type=0
[       3.519] 0
[       3.520] set pc
[       3.520] usbdc_vol = 4000, usbdc_cur = 0
[       3.522] usbpc_vol = 4400, usbpc_cur = 0
[       3.526] init to usb pc
[       3.529] set pc
[       3.610] battery enough
[       3.610] power_start=0x00000000
[       3.610] pre sys mode
[       3.613] key value = 2
[       3.615] recovery key high 40, low 10
[       3.633] show pic finish
[       3.633] load kernel start
[       3.651] load kernel successed
[       3.651] start address = 0x4a000000
[       4.339] power exit detect

U-Boot 2011.09-rc1 (Jun 03 2015 - 14:33:37) Allwinner Technology 

CPU:   SUNXI Family
Board: SUN7I-EVB
DRAM:  512 MiB
NAND:  NB1 : enter NFB_Init
[NAND] nand driver(A20) version: 0x2, 0x12, data: 12 1610225552
[NAND] set nand_good_block_ratio 870 
NB1 : nand phy init ok
NB1 : init ok
1740 MiB
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:5-
-name-        -start-       -size-      
bootloader  : 8000          10000       
env         : 18000         8000        
boot        : 20000         8000        
rootfs      : 28000         80000       
UDISK       : a8000         2be000      
-----------------------------------
no misc partition is found
Hit any key to stop autoboot:  1 0 

Starting kernel ...

root=/dev/nandd
insmod nand.ko return 0
e2fsck /dev/nandd return 0
mount /dev/nandd return 0
Profile Done
Start root...
[[email protected] /] #startsystem...
UI_NO
******UI_NO****
manage.sh....
ioctl[SIOCSIWAP]: Operation not permitted
HK2
a1234567
psk
OK
QVNCServer created on port 5900
"1024768" 
0
usernames "" 

passwds "" 

initflag wai ==  "0" 

initflag li==  "0" 

"psk" 
"psk" 
"psk" 
"psk" 
"HK2" "a1234567" "psk" 
OK
1 
str init() 0 

passwd "" 

OK
OK
OK
udhcpc (v1.21.0) started
Setting IP address 0.0.0.0 on wlan0
Sending discover...
Sending discover...
Sending discover...
No lease, failing

Pictures

Personal tools
Namespaces

Variants
Actions
Navigation
Tools