|Dimensions||24mm x 15mm x 10mm|
|Release Date||Month year|
|Website||Device Product Page|
|SoC||A13 @ 1Ghz|
|DRAM||512MiB DDR3 @ xxxMHz|
|Power||DC 5V @ 3A, 3600mAh 3.7V Li-Ion battery|
|LCD||800x480 (9" 16:9)|
|Touchscreen||X-finger capacitive ( Focaltech FT5406EE8)|
|Audio||3.5mm headphone plug, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Realtek RTL8188CTV)|
|USB||1 USB2.0 OTG|
|Camera||??.?MP (????x????) front, ??.?MP (????x????) rear|
|Other||Accelerometer (Manufacturer device FIXME)|
- Model Number: PMID900
- Build Number: 05.01.001.004.11
Give a brief overview of the current status of support under sunxi here.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
The something button triggers FEL mode.
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.