|Dimensions||242mm x 190mm x 12mm|
|Release Date||February 2012|
|SoC||A10 @ 1Ghz|
|DRAM||1GiB DDR3 @ xxxMHz|
|Power||DC 5V @ 2.1A, 6500mAh ??V Li-Ion battery|
|LCD||1024x768 (9.7" 4:3 IPS)|
|Touchscreen||5-finger capacitive (TODO: Manufacturer device)|
|Video||HDMI (Type C - mini)|
|Audio||3.5mm headphone plug, HDMI, internal stereo speakers, internal microphone|
|Network||WiFi 802.11 b/g/n (Manufacturer device)|
|USB||1 USB2.0 OTG|
|Camera||1.3MP (1280x1024) front, 5MP (2560x1920) rear|
In android, under Settings->About Tablet, you will find:
- Model Number: ONDA MID
- Build Number: mid-eng 4.1.1 JRO03C 20121018 test-keys
- Kernel: 3.0.8+
- Baseband version (sic): v0.4rc1
- Android version: 4.1.1
No patches submitted yet.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
The something button triggers FEL mode.
Device specific topic
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
First need to remove the rubber caps in each corner on the back plate and then remove the tiny screws. Then we've GOT SOME HEADACHES! as it seems the case is glued shut see: https://www.youtube.com/watch?v=gvyKorhEncY
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.