Onda VX610W

From linux-sunxi.org
Jump to: navigation, search
Onda VX610W
Device front.jpg
Manufacturer Onda
Dimensions 186mm x 144mm x 14mm
Release Date Month year
Website Product Page
Specifications
SoC A10 @ 1Ghz
DRAM 512MiB DDR3 @ xxxMHz
NAND 8GB
Power DC 5.2V @ 1A, ??00mAh 3.7V Li-Ion battery
Features
LCD 800x480 (7" 16:9)
Touchscreen 5-finger capacitive (FocalTech FT5206)
Video HDMI (Type C - mini)
Audio 3.5mm headphone plug, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (Realtek RTL8188CUS)
Storage µSD
USB X USB2.0 Host, X USB2.0 OTG

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

Contents

Identification

Find out the strings as reported under settings.

In android, under Settings->About Tablet, you will find:

  • Model Number: DEVICE
  • Build Number: SOC_BOARD_DEVICE_*.*

Sunxi support

Current status

Not supported. No patches have ever been submitted.

Images

HW-Pack

BSP

Manual build

  • For building u-boot, use the "MANUFACTURER_DEVICE" target.
  • The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex

Everything else is the same as the manual build howto.

Tips, Tricks, Caveats

FEL mode

The something button triggers FEL mode.

Adding a serial port (voids warranty)

UART pads

Device disassembly

Provide a short description of how to open the device. Explain how the pins can be most easily popped.

Locating the UART

There is a set of test pads above the SoC, all you have to do is solder on some wires according to our UART howto.

Pictures

Take some pictures of your device, upload them, and add them here.

Also known as

List rebadged devices here.

See also

Add some nice to have links here. This includes related devices, and external links.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools