Olimex-a13-olinuxino-expansion ports

From linux-sunxi.org
Jump to: navigation, search

This is the pin-outs for the expansion ports of the A13-OLinuXino.

If you want to match up the below tables with the actual pin numbers of the connectors, then just turn the device over. All pin numbers are printed on the back.

Contents

LCD_CON

LCD_CON
1 +5V 2 Ground
3 +3.3V 4 Ground
5 PD18 (LCD_D18) 6 nc
7 PD18 (LCD_D18) 8 PD19 (LCD_D19)
9 PD20 (LCD_D20) 10 PD21 (LCD_D21)
11 PD22 (LCD_D22) 12 PD23 (LCD_D23)
13 PD10 (LCD_D10) 14 nc
15 PD10 (LCD_D10) 16 PD11 (LCD_D11)
17 PD12 (LCD_D12) 18 PD13 (LCD_D13)
19 PD14 (LCD_D14) 20 PD15 (LCD_D15)
21 PD2 (LCD_D2) 22 nc
23 PD2 (LCD_D2) 24 PD3 (LCD_D3)
25 PD4 (LCD_D4) 26 PD5 (LCD_D5)
27 PD6 (LCD_D6) 28 PD7 (LCD_D7)
29 PD26 (LCD_HSYNC) 30 PD27 (LCD_VSYNC)
31 PD24 (LCD_CLK) 32 PD25 (LCD_DE)
33 PB3 34 PB4
35 PB10 36 PB2 (PWM0)
37 TPX1 38 TPX2
39 TPY1 40 TPY2

UEXT

UEXT
1 +3.3V 2 Ground
3 PG3 (UART1_TX) 4 PG4 (UART1_RX)
5 PB17 (TWI2_SCK) 6 PB18 (TWI2_SDA)
7 PE3 (SPI2_MISO) 8 PE2 (SPI2_MOSI)
9 PE1 (SPI2_CLK) 10 PE0 (SPI2_CS0)

UART

UART
4 Ground
3 PF2 (SDC0_SCK/UART0-TX)
2 PF4 (SDC0_D3/UART0-RX)
1 +3.3V

GPIO-1

GPIO-1
1 +5V 2 Ground
3 +3.3V 4 Ground
5 RESET_N 6 NMI_N
7 PMU/GPIO-0 8 PMU/GPIO-3
9 PMU/GPIO-1 10 PMU/GPIO-2

GPIO-2

GPIO-2
1 +5V 2 Ground
3 +3.3V 4 Ground
5 PB0 (TWI0-SCK) 6 PG11 (USBH_EN)
7 PB1 (TWI0-SDA) 8 PG10 (VGA_DIS)
9 PB2 (PWM0) 10 PG9 (LED1)
11 PB3 12 PE11
13 PB4 14 PE10
15 PB10 16 PE9
17 PB15 (TWI1-SCK) 18 PE8
19 PB16 (TWI1-SDA) 20 PE7
21 PC0 (NWE/SPI0_MOSI) 22 PE6
23 PC1 (NALE/SPI0_MISO) 24 PE5
25 PC2 (NCLE/SPI0_CLK) 26 PE4
27 PC3 (NCE1/SPI0_CS0) 28 PC19 (NDQS)
29 PC4 (NCE0) 30 PC15 (NDQ7)
31 PC5 (NRE) 32 PC14 (NDQ6)
33 PC6 (NRB0) 34 PC13 (NDQ5)
35 PC7 (NRB1) 36 PC12 (NDQ4)
37 PC8 (NDQ0) 38 PC11 (NDQ3)
39 PC9 (NDQ1) 40 PC10 (NDQ2)
Personal tools
Namespaces

Variants
Actions
Navigation
Tools