|Dimensions||widthmm x breadthmm x heightmm|
|Release Date||Month year|
|Website||Device Product Page|
|SoC||AXX @ XGhz|
|DRAM||512MiB/1GiB/2GiB DDR3 @ xxxMHz|
|Power||DC 5V @ 3A, 3700mAh 3.7V Li-Ion battery|
|LCD||WidthxHeight (X" X:Y)|
|Touchscreen||X-finger capacitive/resistive (Manufacturer device)|
|Video||HDMI (Type A/B/C - full/mini/micro), VGA|
|Audio||3.5mm headphone plug, 3.5mm microphone plug, HDMI, SPDIF, internal stereo speakers, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Manufacturer device), 10/100/1000Mbps Ethernet (Manufacturer device)|
|USB||X USB2.0 Host, X USB2.0 OTG|
|Camera||??.?MP (????x????) front, ??.?MP (????x????) rear|
|Other||Accelerometer (manufacturer device), GPS, IRDA|
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.
On the back of the device, the following is printed:
Manufacturer Marketing Name ModelNumber
The PCB has the following silkscreened on it:
In android, under Settings->About Tablet, you will find:
- Model Number: A19_8723-20
- Android Version: 4.2.2
- Firmware Version: RSH_A19_D
- Kernel Version: 3.3.0 ([email protected] # 29 Fri Aug 30 10:47:48 CST 2013)
- Build Number: RSH-A19-D au8723 20130902
Give a brief overview of the current status of support under sunxi here. If there is mainline support for either u-boot or kernel, mention this too, but add the extra sections below.
- For building u-boot, use the jesurun_a19 target.
- The .fex file can be found in sunxi-boards as jesurun_a19.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
The something button triggers FEL mode.
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.
Optional. Add non-sunxi images in this section.