Inet 86dz d701hc

From linux-sunxi.org
Jump to: navigation, search
Inet 86dz d701hc
Digma optima 7.6-front.png
Manufacturer Digma
Dimensions 193mm x 118.8mm x 10.5mm
Release Date March 2014
Website Product Page
Specifications
SoC A23 @ 1Ghz
DRAM 512MiB DDR3 @ 552MHz
NAND 4GB
Power DC 5V @ 2A, 3000mAh 3.7V Li-Ion battery
Features
LCD 1024x600 (7" 128:75)
Touchscreen 5-finger capacitive (Silead GSL1680)
Audio 3.5mm headphone plug, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (TODO: Manufacturer device)
Storage µSD
USB 1 USB2.0 OTG
Camera 0.3MP (640x480) front (GC0329), 0.3MP (640x480) rear (GC0308)

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

This is a dual-camera higher resolution version of the Inet 86dz d701c.

Contents

Identification

In android, under Settings->About Tablet:

  • Kernel Version: 3.4.39 [email protected] #6 Tue Feb 18 14:16:27 CST 2014
  • Model Number: TT7026MW
  • Build Number: A23_86DZ_D701HC_1402033.20140319

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code.

HW-Pack

Add MANUFACTURER DEVICE HW-pack specifics here.

BSP

Add MANUFACTURER DEVICE BSP specifics here.

Manual build

  • For building u-boot, use the "MANUFACTURER_DEVICE" target.
  • The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex

Everything else is the same as the manual build howto.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The '+' button triggers FEL mode.

Device specific topic

...

Adding a serial port (voids warranty)

DEVICE UART pads

This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.

Device disassembly

If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Take some pictures of your device, upload them, and add them here.

Also known as

Digma Optima 7.6 (Android 4.2)
Digma Optima 7.8 (Android 4.4)

See also

Personal tools
Namespaces

Variants
Actions
Navigation
Tools