Icoo d90w
Jump to navigation
Jump to search
| Icoo d90w | |
|---|---|
 | |
| Manufacturer | Icoo |
| Dimensions | 243.84mm x 187.96mm x 9.53mm |
| Release Date | February 2012 |
| Website | Product Page |
| Specifications | |
| SoC | A10 @ 1Ghz |
| DRAM | 1GiB DDR3 @ 408MHz |
| NAND | 8/16GB |
| Power | DC 5V @ 3A, 7400mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 1024x768 (9.7" 4:3 IPS) |
| Touchscreen | 10-finger capacitive (Goodix GT801 2+1) |
| Video | HDMI (Type C - mini) |
| Audio | 3.5mm headphone plug, HDMI, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Realtek RTL8188CUS) |
| Storage | µSD |
| USB | 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front, 1.3MP (1280x1024) rear |
| Other | Accelerometer (Manufacturer device FIXME) |
| Headers | ??? |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
Identification
In android, under Settings->About Tablet, you will find...
Icoo D90w
- Model Number: D90
- Build Number: 20120323.142651
Coby Kyros MID 9742
- Model Number: MID9742
- Build Number: 20120701.123627
Sunxi support
Current status
No patches were ever made available.
Images
HW-Pack
BSP
Manual build
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
FEL mode
The something button triggers FEL mode.
Adding a serial port (voids warranty)
Device disassembly
First remove the 4 screws in the corners, then use your plastic tool to push the edge of the back cover outwards.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here.
Also known as
The board was made by Shenzhen Sochip Technology Limited, and is named Sochip SC3052. Searching for this reveals several rebadges.
- Icoo D90W.
- Coby Kyros MID9742
- MP MAN MP2000 (MP948)
- SYSBAY S-MP99