|Dimensions||180mm x 12mm x 115mm|
|Release Date||May 2012|
|SoC||A13 @ 1Ghz|
|DRAM||512MiB DDR3 @ 432MHz|
|Power||DC 5V @ 3A, 3000mAh 3.7V Li-Ion battery|
|LCD||800x480 (7" 16:9)|
|Touchscreen||5-finger capacitive (Goodix GT811)|
|Audio||3.5mm headphone plug, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Realtek RTL8188CTV)|
|USB||1 USB2.0 OTG|
|Camera||0.3MP (640x480) front|
|Other||Accelerometer (Manufacturer device FIXME)|
In android, under Settings->About Tablet, you will find:
- Model Number: A13-EVB
- Build Number: nuclear_D50_sc3038n-eng 4.0.4 IMM76D 20120801 test-keys
- For building u-boot, use the "Icoo_d50" target.
- The .fex file can be found in sunxi-boards as icoo_d50.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Adding a serial port (voids warranty)
The back cover needs to be gently pushed outwards with your Plastic Tool. Be careful though, as the LCD and Touchpanel ribbons are short.
Locating the UART
On the back of the PCB, there are pads labelled "RX" and "TX". All you have to do is solder on some wires according to our UART howto.