GLD KF026
| GLD KF026 | |
|---|---|
 | |
| Manufacturer | Softwinners |
| Dimensions | widthmm x breadthmm x heightmm |
| Release Date | Month year |
| Specifications | |
| SoC | A13 @ 1.2Ghz |
| DRAM | 512MiB DDR3 @ xxxMHz |
| NAND | 2/4/8/16GB |
| Power | DC 5V @ ?A, 3000mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 800x480 (9" 16:9) |
| Touchscreen | X-finger capacitive/resistive (Manufacturer device FIXME) |
| Audio | 3.5mm headphone/microphone plug, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Manufacturer device FIXME) |
| Storage | µSD |
| USB | 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front |
| Other | Accelerometer (manufacturer device FIXME) |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurp.
Identification
In android, under Settings->About Tablet, you will find:
- Model Number: MID
- Build Number: GLD-HJDZ_V2.0.6_20130603_40LK_0308-0309-121d_a489_2628a00
Or:
- Model Number: Softwinerkf026
- Build Number: kf026_V2.0.6_20130603_a489_2628a00
Sunxi support
Current status
Give a brief overview of the current status of support under sunxi here.
Images
Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code.
HW-Pack
Add MANUFACTURER DEVICE HW-pack specifics here.
BSP
Add MANUFACTURER DEVICE BSP specifics here.
Manual build
- For building u-boot, use the "softwinners_kf026" target.
- The .fex file can be found in sunxi-boards as gld_kf026.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The BACK + POWER button triggers FEL mode.
Recovery mode
The VOLUP + POWER button triggers recovery mode.
Device specific topic
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
Remove screws from the right side, then pull off the back cover.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Also known as
Lingxiu T21
See also
Add some nice to have links here. This includes related devices, and external links.