A33 M1016C-W-11Q9

From linux-sunxi.org
Jump to: navigation, search
A33 M1016C-W-11Q9
Manufacturer Unidentified manufacturer "ET"
Dimensions 182mm x 121mm x 7mm
Release Date 21/11/2015
Website Missing product page.
Specifications
SoC A33 @ ?.?Ghz
DRAM 1GB [email protected] 480MHz (2x 512X8DDR3 fake)
NAND 8GB
Power DC 5V @ 3A, 5000mAh 3.7V Li-Ion battery
Features
LCD 1024x600 (10" 16:9)
Touchscreen 5-finger capacitive (Silead GSL3676)
Audio 3.5mm headphone plug, internal speaker, internal microphone
Network WiFi 802.11 b/g/n and Bluetooth (RTL8723bs),
Storage µSD
USB 1 USB2.0 OTG
Camera 0.3 MP (640x480) front, 0.3 MP (640x480) rear

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.

Contents

Identification

On the back of the device, the following is printed:

AOSON  M1016 Quadcore Made in China 

The PCB has the following silkscreened on it:

11Q9-A33-V1.0

In android, under Settings->About Tablet, you will find:

  • Model Number: M1016C-W'
  • Build Number: "M1016C-W-11Q9-20160331
  • Kernel Version: "3.4.39 [email protected] #84"
  • Firmware version: "v2.1"

Chips

  • GSL3676
  • RTL8723BS
  • AXP223

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Use the MANUFACTURER_DEVICE.fex file.

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Android modules

Module name			Size		Status/used bu
-------------------------------------------------------------------------------
723bs_vq0 1808108 0 - Live 0x00000000
gslX680new 503004 0 - Live 0x00000000 (F)
stk831x 24953 0 - Live 0x00000000
sunxi_schw 12559 0 - Live 0x00000000 (O)
cdc_ether 5099 0 - Live 0x00000000
rtl8150 9023 0 - Live 0x00000000
mcs7830 6292 0 - Live 0x00000000
qf9700 7805 0 - Live 0x00000000
asix 17150 0 - Live 0x00000000
usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000
sunxi_keyboard 3021 0 - Live 0x00000000
sw_device 13612 0 - Live 0x00000000
vfe_v4l2 445340 0 - Live 0x00000000
gc0308 10814 0 - Live 0x00000000
gc2035 12704 0 - Live 0x00000000
vfe_subdev 4523 3 vfe_v4l2,gc0308,gc2035, Live 0x00000000
vfe_os 3951 2 vfe_v4l2,vfe_subdev, Live 0x00000000
cci 21602 4 gc0308,gc2035, Live 0x00000000
videobuf_dma_contig 5567 1 vfe_v4l2, Live 0x00000000
videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000
leds_sunxi 1359 0 - Live 0x00000000
mali 207434 60 - Live 0x00000000 (O)
lcd 38432 0 - Live 0x00000000
disp 983922 8 mali,lcd, Live 0x00000000
nand 280130 6 - Live 0x00000000 (O)

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The something button triggers FEL mode.

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Adding a serial port (voids warranty)

DEVICE UART pads

This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.

Device disassembly

If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.

Also known as

List rebadged devices here.

See also

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Optional. Add non-sunxi images in this section.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools