File:OPi Zero preparing Access Point.jpg
Jump to navigation
Jump to search
Size of this preview: 687 × 599 pixels. Other resolutions: 275 × 240 pixels | 1,380 × 1,204 pixels.
Original file (1,380 × 1,204 pixels, file size: 395 KB, MIME type: image/jpeg)
Preparing OPi Zero as sensor equipped and passive PoE powered Access Point. 24V coming from passive PoE injector are taken from Ethernet cables 4/5 and 7/8 through solder pads on the lower PCB side, fed to buck converter and the 5V from there connected to pins 2/6 on RPi header (pin 2 = 5V, pin 6 = GND)
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:18, 12 November 2016 | | 1,380 × 1,204 (395 KB) | Tkaiser (talk | contribs) | Preparing OPi Zero as sensor equipped and passive PoE powered Access Point. 24V coming from passive PoE injector are taken from Ethernet cables 4/5 and 7/8 through solder pads on the lower PCB side, fed to buck converter and the 5V from there connected... |
You cannot overwrite this file.
File usage
The following page uses this file:
