Excelvan bt1077

From linux-sunxi.org
Jump to: navigation, search
Excelvan bt1077
Device front.jpg
Manufacturer [https://excelvan.com
Dimensions widthmm x breadthmm x heightmm
Release Date 09 2015
Website Device Product Page
Specifications
SoC A83T @ 2.0Ghz
DRAM 1GiB DDR3 @ xxxMHz
NAND 16GB
Power DC 5V @ 2A, 6000mAh 3.7V Li-Ion battery
Features
LCD 10.1"
Touchscreen 5-finger capacitive (SiLead GSL3675)
Video HDMI (micro)
Audio 3.5mm headphone plug, HDMI, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (Realtek RTL8723BU)
Storage µSD
USB 1 USB2.0 OTG
Camera 2MP front, 8MP rear

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.

Contents

Identification

This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.

On the back of the device, the following is printed:

Manufacturer Marketing Name
ModelNumber

The PCB has the following silkscreened on it:

LIA-BB-V6.66
1970-01-01

In android, under Settings->About Tablet, you will find:

  • Model Number: DEVICE
  • Build Number: SOC_BOARD_DEVICE_*.*

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Use the MANUFACTURER_DEVICE.fex file.

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The something button triggers FEL mode.

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Adding a serial port (voids warranty)

DEVICE UART pads

Both RX and TX plots are printed on the board, near the A83T SoC.

Device disassembly

If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.

Also known as

List rebadged devices here. Neutab N10 Plus

See also

A related tablet: https://linux-sunxi.org/Yones_Toptech_BS1078

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Android (Excelvan) Android (Neutab)

Personal tools
Namespaces

Variants
Actions
Navigation
Tools